Technical articles

Selection of Filters for the Separation Process

Chemical Engineering World

Selecting the right type of liquid/solid separating equipment is not a simple task as the range of equipment is very large. For these reasons it is useful for an engineer confronted with a separation problem to conduct the basic evaluations of the possible or probable solutions and above all establish which routes not to follow. This article will help to conduct basic testwork and then to select the most optimum separation equipment.

Published in: Chemical Engineering World - 68 - December 2009
PDF (0.9 MB)
Selection of Filters for the Separation Process
68 - December 2009
December 2009

Size: 0.9 MB

Brought into line - Rotor crushers for the production of sand and fine sand

AT MINERAL PROCESSING

For the production of sands for the construction materials industry BHS Sonthofen has developed special rotor crushers, which depending on crushing requirements and the application range of the sand product can process soft, medium-hard to hard and wear-intensive rock. At the company's test centre original machines are available for conducting test series. The following paper describes the principle of operation of BHS rotor crushers and presents different examples of crusher performance with reference to screening curves.

Published in: AT MINERAL PROCESSING - 11-2009
PDF (641 KB)
Brought into line - Rotor crushers for the production of sand and fine sand
11-2009
November 2009

Size: 641 KB

Continuous Pressure and Vacuum Filtration and Washing of Organic Cellulose and Biomass Products

BHS-Filtration Inc.

The processing of organic, cellulose-containing materials has been around for many years. Currently, due to high oil prices as well as the significant increase in ethanol usage nationwide from both grain based and cellulosic based sources, there is tremendous interest in developing efficient, cost-effective manufacturing processes to produce energy from cellulosic feed stocks. This article will use actual process data to highlight the choice of pressure or vacuum filtration and cake-washing techniques for these newly developed bioprocesses.

Published in: BHS-Filtration Inc. - 2009
PDF (293 KB)
Continuous Pressure and Vacuum Filtration and Washing of Organic Cellulose and Biomass Products
2009
October 2009

Size: 293 KB

Rotorshredder makes light work of refrigerators

Recycling International

To date, the RS Rotorshredder developed by German company BHS-Sonthofen has been used mainly for the disintegration and size reduction of mixed electronic waste and of shredder light fractions. But according to the manufacturer, the machine has not been exploited to anywhere near its full potential. However, since the summer of 2008, the largest model - the RS 3218 - has been used in the size reduction of refrigeration appliances by recycling company H.J. Hansen A/S of Odense in Denmark.

Published in: Recycling International - October 2009
PDF (179 KB)
Rotorshredder makes light work of refrigerators
October 2009
October 2009

Size: 179 KB

Shredder light fraction: the push to crush

Recycling International

Separation of the individual components of the shredder light fraction (SLF) is no easy task. However, German plant manufacturer BHS-Sonthofen has developed selective crushing machines which, it claims, can engineer potentially significant cost savings for shredder operators via the disaggregation and cleaning of input SLF material.

Published in: Recycling International - August 2009
PDF (340 KB)
Shredder light fraction: the push to crush
August 2009
August 2009

Size: 340 KB

Settle down - Selection of Liquid/Solid Separating Equipment

TCE

In this three-part article, in part 1 Messrs. Pierson and Perlmutter discuss testing, selection of liquid/solid separating equipment and give practical filtration tips. In part 2 of this, Messrs. Pierson and Perlmutter discuss the finer points of filtration. Finally, in part 3 of their series, Messrs. Pierson and Perlmutter provide a summary and preliminary selection guide for various types of pressure, vacuum, batch and continuous filtration equipment.

Published in: TCE - June 2009
PDF (2.0 MB)
Settle down - Selection of Liquid/Solid Separating Equipment
June 2009
June 2009

Size: 2.0 MB

Impact Stresses for Selective Comminution - For processing slag, incineration ash and dross

AT MINERAL PROCESSING

Metal-containing waste, e.g. slag, incineration ash and dross, are formed during the production of metals and are to be recycled as waste-derived materials. To obtain an optimal and marketable separated product from the processing of these material groups, the process parameters must be individually adjusted depending on the required final product, but series of tests conducted at the BHS test centre have shown that the above-mentioned wastederived materials can be processed in the same machine systems despite different their material properties.

Published in: AT MINERAL PROCESSING - 5/2009
PDF (180 KB)
Impact Stresses for Selective Comminution - For processing slag, incineration ash and dross
5/2009
June 2009

Size: 180 KB
Share this page:
Online contact request
Verify your details
Verify your details

Search filter

Language versions






Categories




Years




















Reset selection
Reset selection

BHS technical center

Tests give certainty
OK
We use cookies in order to adapt the website to the requirements of our visitors in the best possible way. The use of our website indicates your agreement to having cookies stored on your computer. Data privacy